Content Comparison

Run the command set protocols ospf interface vif network to enable OSPF on an interface and specify a network type. Enabling OSPF on an interface allows the interface to send and receive LSAs. Four different network types can be specified here namely, broadcast, non-broadcast, point-to-multipoint and point-to-point.

To delete this configuration, run the command delete protocols ospf interface vif network

Command Syntax

set protocol protocols ospf interface <vlan-interface> vif <vlan-interface><vlan-interface>network {broadcast|non-broadcast|point-to-multipoint|point-to-point}

delete protocol protocols ospf interface <vlan-interface> vif <vlan-interface> <vlan-interface>network {broadcast|non-broadcast|point-to-multipoint|point-to-point}

Parameter

Example

•  Enable OSPF on interface vlan200 and specify network type as point-to-point.

admin@XorPlus# set protocols ospf interface vlan200 vif vlan200 network point-to-point
admin@Xorplus# commit

...