...
set protocols bgp [vrf <vrf-name>] [ipv4 {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast] neighbor <bgppeer> } as-override
delete protocols bgp [vrf <vrf-name>] [ipv4 {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast] neighbor <bgppeer> } as-override
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <bgppeer>{ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} | Specifies the type of the address family. |
| neighbor <ip> | Specifies the IP address of a peer or a Peer-Grouppeer. |
| peer-group <peer-group> | Specifies a peer group. |
| interface <interface> | Specifies an interface for BGP connection. |
Usage Guidelines
Usually this configuration is used in PEs (Provider Edge) to replace the incoming customer AS number so the connected CE (Customer Edge) can use the same AS number as the other customer sites. This allows customers of the provider network to use the same AS number across their sites.
This command is only allowed for eBGP peers.
...
| Code Block |
|---|
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast as-override
admin@XorPlus# commit |
...