...
| Info |
|---|
|
- MVRP is not allowed to be enabled on the host-side interfaces of the access devices, say ge-1/1/1 on Switch A and ge-1/1/2 on Switch C. However, MVRP needs to be enabled on ge-1/1/2 of Switch A, ge-1/1/1 of Switch C and all interfaces of Switch B .
- The port mode of MVRP interfaces should be Trunk type.
- VLANs need to be statically configured on the access interfaces of the access devices at both ends of the network, in order to implement MVRP bidirectional VLAN registration process.
|
Procedure
Switch A
Step1 Configure VLAN and port mode.
...