...
To enable originating a default Type-5 routesroute, run the command set protocol protocols bgp evpn default-originate. Both the IPv4 and IPv6 default Type-5 routes are supported to be originated. Optional parameter vrf can be used to specify a VRF, if no VRF is specified the command takes effect on the default VRF. The other optional parameter is l2vpn to specify that the command affects layer 2 VPN.
The command delete protocol delete protocols bgp evpn default-originate can be used to remove this configuration.
Command Syntax
set protocol protocols bgp [vrf <vrf {text}l2vpn] -name>] evpn default-originate <ipv4|ipv6>ipv6>
delete protocol protocols bgp [vrf <text>] [l2vpn] evpn default-originate <ipv4|ipv6>
...
Parameter | Description |
vrf <vrf-name> | Optional. Specifies the name of the VRF. |
l2vpn | Optional. Specifies that the configuration applies to layer 2 VPN. |
default-originate (ipv4<ipv4|ipv6)ipv6> | Specifies whether IPv4 or IPv6 Type-5 routes are route to be originated. |
Example
- Configure the device to originate the IPv4 default Type-5 routes for VRF BLUE.
| Code Block |
|---|
admin@Xorplus# set protocolprotocols bgp vrf BLUE l2vpn evpn default-originate ipv4 admin@Xorplus# commit |
...