Versions Compared

Version Old Version 3 New Version Current
Changes made by

Tracy Yang

Tracy Yang

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The set protocol protocols bgp evpn advertise-default-gw command is used to configure the gateway VTEPs to advertise the IP/MAC address. Optional parameter vrf can be added to identify the VRF for which to advertise the IP/MAC address. The second optional parameter is the l2vpn, to specify only layer 2 EVPN. 

The delete protocol protocols bgp evpn advertise-default-gw can be used to delete the configuration.


Command Syntax

set protocol protocols bgp [vrf <text>] [l2vpn<vrf-name>] evpn advertise-default-gw

delete protocol protocols bgp [vrf <vrf<text>] [l2vpn] -name>] evpn advertise-default-gw

...

Parameter

Optional Specifies the configuration applies to layer 2 EVPN only.

Parameter

Description

vrf <vrf <text>-name>

Optional. Specifies the name of the VRF.

l2vpn 

.


Example

  • Configure BGP layer 2 EVPN to advertise default gateway for VRF BLUE.
Code Block
admin@Xorplus# set protocolprotocols bgp vrf BLUE l2vpnevpn advertise-default-gw
admin@Xorplus# commit