Content Comparison

You can To forward AmpCon™AmpCon-DC logs to other external syslog servers.Syslog servers, configure as follows:

Prerequisite

You must enable the syslog Ensure that the Syslog service of the target server is enabled.

Procedure

To update the encrypt key, follow these steps:

1. Log in to the AmpCon-DC UI, and click Service > System Config.

2. On the “Global System Config”page, click Syslog Config.

3. Enter Input the following information:

   • IP: The IP address of the external syslog Syslog server.

   • Port: The port number of the external syslog Syslog server.

   • Protocol: TCP or UDP.

   • Level: SUCCESS or ERROR. The mapping rules of Ampcon-DC Log levels and syslog Syslog rules are as follows:

     • SUCCESS is equal to info (level=6)

     • ERROR is equal to warning (level=4)

For example, if the ERROR level is specified, the syslog Syslog server receives logs with a warning level or higher from Ampcon-DC.

...

4. Click Add.

Verifying Syslog

...

Forwarding

To verify whether AmpCon-DC logs can be forwarded to the syslog Syslog server, follow these steps:

1. Log in to the AmpCon-Ampus DC UI, and click Service > System Config.

2. In the License Portal User field, enter an incorrect username, and click Save.

...

3. Access the AmpCon-Ampus DC server by using MobaXterm for verification.

...