Versions Compared

Version Old Version 5 New Version Current
Changes made by

Tracy Yang (Unlicensed)

Tracy Yang (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Code Block
admin@Leaf1# set protocols bgp local-as 65001
admin@Leaf1# set protocols bgp router-id 10.226.14.207
admin@Leaf1# set protocols bgp neighbor 10.226.14.48 remote-as internal
admin@Leaf1# set protocols bgp neighbor 10.226.14.48 update-source 10.226.14.207
admin@Leaf1# set protocols bgp neighbor 10.226.14.48 evpn activate true
admin@Leaf1# set protocols bgp neighbor 10.226.14.208 remote-as internal
admin@Leaf1# set protocols bgp neighbor 10.226.14.208 update-source 10.226.14.207
admin@Leaf1# set protocols bgp neighbor 10.226.14.208 evpn activate true
admin@Leaf1# set protocols bgp neighbor 10.226.14.24 remote-as internal
admin@Leaf1# set protocols bgp neighbor 10.226.14.24 update-source 10.226.14.207
admin@Leaf1# set protocols bgp neighbor 10.226.14.24 evpn activate true
admin@Leaf1# set protocols bgp ipv4-unicast
admin@Leaf1# set protocols bgp evpn advertise-all-vni
admin@Leaf1# set protocols bgp evpn advertise ipv4-unicast
admin@Leaf1# set protocols bgp evpn advertise ipv6-unicast
admin@Leaf1# set protocols bgp evpn advertise-svi-ip
admin@Leaf1# set protocols bgp vrf vrf1 local-as 65001
admin@Leaf1# set protocols bgp vrf vrf1 router-id 17.17.17.17
admin@Leaf1# set protocols bgp vrf vrf1 evpn advertise ipv4-unicast
admin@Leaf1# set protocols bgp vrf vrf1 evpn advertise ipv6-unicast
admin@Leaf1# set protocols evpn mh
admin@Leaf1# set protocols evpn mh redirect-off 
admin@Leaf1# set protocols lldp enable true

Step7. Configure OSPF.

...

Code Block
admin@Leaf2# set interface aggregate-ethernet ae1 aggregated-ether-options lacp enable true
admin@Leaf2# set interface aggregate-ethernet ae2 aggregated-ether-options lacp enable true
admin@Leaf2# set interface aggregate-ethernet ae1 family ethernet-switching port-mode trunk
admin@Leaf2# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 30
admin@Leaf2# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 20
admin@Leaf2# set interface aggregate-ethernet ae1 evpn mh es-id 4
admin@Leaf2# set interface aggregate-ethernet ae1 evpn mh es-sys-mac 00:22:22:22:22:22
admin@Leaf2# set interface aggregate-ethernet ae2 family ethernet-switching port-mode "trunk"
admin@Leaf2# set interface aggregate-ethernet ae2 family ethernet-switching vlan members 30
admin@Leaf2# set interface aggregate-ethernet ae2 family ethernet-switching vlan members 20
admin@Leaf2# set interface aggregate-ethernet ae2 evpn mh es-id 2
admin@Leaf2# set interface aggregate-ethernet ae2 evpn mh es-sys-mac 00:22:22:22:22:22
admin@Leaf2# set interface gigabit-ethernet te-1/1/17 mtu 3000
admin@Leaf2# set interface gigabit-ethernet te-1/1/17 family ethernet-switching native-vlan-id 4014
admin@Leaf2# set interface gigabit-ethernet te-1/1/19 mtu 3000
admin@Leaf2# set interface gigabit-ethernet te-1/1/19 family ethernet-switching native-vlan-id 4013
admin@Leaf2# set interface gigabit-ethernet te-1/1/21 ether-options 802.3ad ae2
admin@Leaf2# set interface gigabit-ethernet te-1/1/23 ether-options 802.3ad ae1
admin@Leaf2# set interface ethernet-switching-options
admin@Leaf2# set ip routing enable true
admin@Leaf2# set ip vrf vrf1
admin@Leaf2# set l3-interface loopback lo address 10.226.14.253 prefix-length 32
admin@Leaf2# set l3-interface loopback vrf1 address 26.26.26.26 prefix-length 32
admin@Leaf2# set l3-interface vlan-interface vlan4013 address 10.226.15.25 prefix-length 30
admin@Leaf2# set l3-interface vlan-interface vlan4014 address 10.226.15.81 prefix-length 30
admin@Leaf2# set l3-interface vlan-interface vlan4094 address 10.226.13.25 prefix-length 30
admin@Leaf2# set l3-interface vlan-interface vlan99 vrf vrf1
admin@Leaf2# set l3-interface vlan-interface vlan20 vrf vrf1
admin@Leaf2# set l3-interface vlan-interface vlan20 address 192.168.0.3 prefix-length 24
admin@Leaf2# set l3-interface vlan-interface vlan20 address 2002:0:0:1::3 prefix-length 64
admin@Leaf2# set l3-interface vlan-interface vlan30 vrf vrf1
admin@Leaf2# set l3-interface vlan-interface vlan30 address 172.168.0.3 prefix-length 24
admin@Leaf2# set l3-interface vlan-interface vlan30 address 2003:0:0:1::3 prefix-length 64
admin@Leaf2# set l3-interface vlan-interface vlan20 router-mac 00:00:20:00:00:FE
admin@Leaf2# set l3-interface vlan-interface vlan30 router-mac 00:00:30:00:00:FE
admin@Leaf2# set protocols bgp local-as 65001
admin@Leaf2# set protocols bgp router-id 10.226.14.208
admin@Leaf2# set protocols bgp neighbor 10.226.14.48 remote-as internal
admin@Leaf2# set protocols bgp neighbor 10.226.14.48 update-source 10.226.14.208
admin@Leaf2# set protocols bgp neighbor 10.226.14.48 evpn activate true
admin@Leaf2# set protocols bgp neighbor 10.226.14.207 remote-as internal
admin@Leaf2# set protocols bgp neighbor 10.226.14.207 update-source 10.226.14.208
admin@Leaf2# set protocols bgp neighbor 10.226.14.207 evpn activate true
admin@Leaf2# set protocols bgp neighbor 10.226.14.24 remote-as internal
admin@Leaf2# set protocols bgp neighbor 10.226.14.24 update-source 10.226.14.208
admin@Leaf2# set protocols bgp neighbor 10.226.14.24 evpn activate true
admin@Leaf2# set protocols bgp ipv4-unicast
admin@Leaf2# set protocols bgp evpn advertise-all-vni
admin@Leaf2# set protocols bgp evpn advertise ipv4-unicast
admin@Leaf2# set protocols bgp evpn advertise ipv6-unicast
admin@Leaf2# set protocols bgp evpn advertise-svi-ip
admin@Leaf2# set protocols bgp vrf vrf1 local-as 65001
admin@Leaf2# set protocols bgp vrf vrf1 router-id 26.26.26.26
admin@Leaf2# set protocols bgp vrf vrf1 evpn advertise ipv4-unicast
admin@Leaf2# set protocols bgp vrf vrf1 evpn advertise ipv6-unicast 
admin@Leaf2# set protocols evpn mh
admin@Leaf2# set protocols evpn mh redirect-off
admin@Leaf2# set protocols lldp enable true
admin@Leaf2# set protocols ospf router-id 110.110.110.110
admin@Leaf2# set protocols ospf network 10.226.15.24/30 area 0.0.0.0
admin@Leaf2# set protocols ospf network 10.226.15.80/30 area 0.0.0.0
admin@Leaf2# set protocols ospf network 10.226.14.208/32 area 0.0.0.0
admin@Leaf2# set protocols ospf network 10.226.14.253/32 area 0.0.0.0
admin@Leaf2# set vlans vlan-id 20 l3-interface vlan20
admin@Leaf2# set vlans vlan-id 30 l3-interface vlan30
admin@Leaf2# set vlans vlan-id 99 l3-interface vlan99
admin@Leaf2# set vlans vlan-id 4013 l3-interface vlan4013
admin@Leaf2# set vlans vlan-id 4014 l3-interface vlan4014
admin@Leaf2# set vlans vlan-id 4094 l3-interface vlan4094
admin@Leaf2# set vxlans source-interface lo address 10.226.14.253
admin@Leaf2# set vxlans vni 10030 decapsulation mode service-vlan-per-port
admin@Leaf2# set vxlans vni 10030 vlan 30
admin@Leaf2# set vxlans vni 10030 arp-nd-suppress disable false
admin@Leaf2# set vxlans vni 10020 decapsulation mode service-vlan-per-port
admin@Leaf2# set vxlans vni 10020 vlan 20
admin@Leaf2# set vxlans vni 10020 arp-nd-suppress disable false
admin@Leaf2# set vxlans vni 99 vlan 99
admin@Leaf2# set vxlans vrf vrf1 l3-vni 99
admin@Leaf2# commit

...

Code Block
admin@Leaf3# set interface aggregate-ethernet ae1 aggregated-ether-options lacp enable true
admin@Leaf3# set interface aggregate-ethernet ae2 aggregated-ether-options lacp enable true
admin@Leaf3# set interface aggregate-ethernet ae1 family ethernet-switching port-mode trunk
admin@Leaf3# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 30
admin@Leaf3# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 20
admin@Leaf3# set interface aggregate-ethernet ae1 evpn mh es-id 3
admin@Leaf3# set interface aggregate-ethernet ae1 evpn mh es-sys-mac 00:00:00:22:22:22
admin@Leaf3# set interface aggregate-ethernet ae2 family ethernet-switching port-mode trunk
admin@Leaf3# set interface aggregate-ethernet ae2 family ethernet-switching vlan members 30
admin@Leaf3# set interface aggregate-ethernet ae2 family ethernet-switching vlan members 20
admin@Leaf3# set interface aggregate-ethernet ae2 evpn mh es-id 1
admin@Leaf3# set interface aggregate-ethernet ae2 evpn mh es-sys-mac 00:00:00:22:22:22
admin@Leaf3# set interface gigabit-ethernet ge-1/1/3 mtu 3000
admin@Leaf3# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching native-vlan-id 4016
admin@Leaf3# set interface gigabit-ethernet ge-1/1/5 mtu 3000
admin@Leaf3# set interface gigabit-ethernet ge-1/1/5 family ethernet-switching native-vlan-id 3012
admin@Leaf3# set interface gigabit-ethernet ge-1/1/21 ether-options 802.3ad ae1
admin@Leaf3# set interface gigabit-ethernet ge-1/1/22 ether-options 802.3ad ae2
admin@Leaf3# set interface ethernet-switching-options
admin@Leaf3# set ip routing enable true
admin@Leaf3# set ip vrf vrf1
admin@Leaf3# set l3-interface loopback lo address 10.226.14.24 prefix-length 32
admin@Leaf3# set l3-interface loopback lo address 10.226.14.201 prefix-length 32
admin@Leaf3# set l3-interface vlan-interface vlan3011 address 10.226.0.98 prefix-length 30
admin@Leaf3# set l3-interface vlan-interface vlan3012 address 10.226.0.94 prefix-length 30
admin@Leaf3# set l3-interface vlan-interface vlan99 vrf vrf1
admin@Leaf3# set l3-interface vlan-interface vlan20 vrf vrf1
admin@Leaf3# set l3-interface vlan-interface vlan20 address 192.168.0.3 prefix-length 24
admin@Leaf3# set l3-interface vlan-interface vlan20 address 2002:0:0:1::3 prefix-length 64
admin@Leaf3# set l3-interface vlan-interface vlan30 vrf vrf1
admin@Leaf3# set l3-interface vlan-interface vlan30 address 172.168.0.3 prefix-length 24
admin@Leaf3# set l3-interface vlan-interface vlan30 address 2003:0:0:1::3 prefix-length 64
admin@Leaf3# set l3-interface vlan-interface vlan20 router-mac 00:00:20:00:00:FE
admin@Leaf3# set l3-interface vlan-interface vlan30 router-mac 00:00:30:00:00:FE
admin@Leaf3# set protocols bgp local-as 65001
admin@Leaf3# set protocols bgp router-id 10.226.14.24
admin@Leaf3# set protocols bgp neighbor 10.226.14.207 remote-as internal
admin@Leaf3# set protocols bgp neighbor 10.226.14.207 timers delayopen 60
admin@Leaf3# set protocols bgp neighbor 10.226.14.207 update-source "10.226.14.24"
admin@Leaf3# set protocols bgp neighbor 10.226.14.207 evpn activate true
admin@Leaf3# set protocols bgp neighbor 10.226.14.208 remote-as "internal"
admin@Leaf3# set protocols bgp neighbor 10.226.14.208 timers delayopen 60
admin@Leaf3# set protocols bgp neighbor 10.226.14.208 update-source 10.226.14.24
admin@Leaf3# set protocols bgp neighbor 10.226.14.208 evpn activate true
admin@Leaf3# set protocols bgp neighbor 10.226.14.48 remote-as internal
admin@Leaf3# set protocols bgp neighbor 10.226.14.48 timers delayopen 60
admin@Leaf3# set protocols bgp neighbor 10.226.14.48 update-source 10.226.14.24
admin@Leaf3# set protocols bgp neighbor 10.226.14.48 evpn activate true
admin@Leaf3# set protocols bgp ipv4-unicast
admin@Leaf3# set protocols bgp evpn advertise-all-vni
admin@Leaf3# set protocols bgp evpn advertise ipv4-unicast
admin@Leaf3# set protocols bgp evpn advertise ipv6-unicast
admin@Leaf3# set protocols bgp evpn advertise-svi-ip
admin@Leaf3# set protocols evpn mh
admin@Leaf3# set protocols evpn mh redirect-off 
admin@Leaf3# set protocols lldp enable true
admin@Leaf3# set protocols ospf router-id 24.24.24.24
admin@Leaf3# set protocols ospf network 10.226.0.96/30 area 0.0.0.0
admin@Leaf3# set protocols ospf network 10.226.0.92/30 area 0.0.0.0
admin@Leaf3# set protocols ospf network 10.226.14.201/32 area 0.0.0.0
admin@Leaf3# set protocols ospf network 10.226.14.24/32 area 0.0.0.0
admin@Leaf3# set vlans vlan-id 20 l3-interface vlan20
admin@Leaf3# set vlans vlan-id 30 l3-interface vlan30
admin@Leaf3# set vlans vlan-id 99 l3-interface vlan99
admin@Leaf3# set vlans vlan-id 3012 l3-interface vlan3012
admin@Leaf3# set vlans vlan-id 4016 l3-interface vlan4016
admin@Leaf3# set vxlans source-interface lo address 10.226.14.201
admin@Leaf3# set vxlans vni 10020 decapsulation mode service-vlan-per-port
admin@Leaf3# set vxlans vni 10020 vlan 20
admin@Leaf3# set vxlans vni 10020 arp-nd-suppress disable false
admin@Leaf3# set vxlans vni 10030 decapsulation mode service-vlan-per-port
admin@Leaf3# set vxlans vni 10030 vlan 30
admin@Leaf3# set vxlans vni 10030 arp-nd-suppress disable false
admin@Leaf3# set vxlans vni 99 vlan 99
admin@Leaf3# set vxlans traceoptions flag all disable false
admin@Leaf3# set vxlans vrf vrf1 l3-vni 99
admin@Leaf3# commit

...

Code Block
admin@Leaf4# set interface aggregate-ethernet ae1 aggregated-ether-options lacp enable true
admin@Leaf4# set interface aggregate-ethernet ae2 aggregated-ether-options lacp enable true
admin@Leaf4# set interface aggregate-ethernet ae1 family ethernet-switching port-mode trunk
admin@Leaf4# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 30
admin@Leaf4# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 20
admin@Leaf4# set interface aggregate-ethernet ae1 evpn mh es-id 1
admin@Leaf4# set interface aggregate-ethernet ae1 evpn mh es-sys-mac 00:00:00:22:22:22
admin@Leaf4# set interface aggregate-ethernet ae2 mtu 3000
admin@Leaf4# set interface aggregate-ethernet ae2 family ethernet-switching port-mode trunk
admin@Leaf4# set interface aggregate-ethernet ae2 family ethernet-switching vlan members 30
admin@Leaf4# set interface aggregate-ethernet ae2 family ethernet-switching vlan members 20
admin@Leaf4# set interface aggregate-ethernet ae2 evpn mh es-id 3
admin@Leaf4# set interface aggregate-ethernet ae2 evpn mh es-sys-mac 00:00:00:22:22:22
admin@Leaf4# set interface gigabit-ethernet ge-1/1/3 mtu 3000
admin@Leaf4# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching native-vlan-id 3011
admin@Leaf4# set interface gigabit-ethernet ge-1/1/5 mtu 3000
admin@Leaf4# set interface gigabit-ethernet ge-1/1/5 family ethernet-switching native-vlan-id 3012
admin@Leaf4# set interface gigabit-ethernet ge-1/1/21 ether-options 802.3ad ae1
admin@Leaf4# set interface gigabit-ethernet ge-1/1/22 ether-options 802.3ad ae2
admin@Leaf4# set ip routing enable true
admin@Leaf4# set ip vrf vrf1
admin@Leaf4# set l3-interface loopback lo address 10.226.14.202 prefix-length 32
admin@Leaf4# set l3-interface loopback lo address 10.226.14.48 prefix-length 32
admin@Leaf4# set l3-interface loopback vrf1 address 48.48.48.48 prefix-length 32
admin@Leaf4# set l3-interface vlan-interface vlan3011 address 10.226.15.70 prefix-length 30
admin@Leaf4# set l3-interface vlan-interface vlan3012 address 10.226.15.78 prefix-length 30
admin@Leaf4# set l3-interface vlan-interface vlan99 vrf vrf1
admin@Leaf4# set l3-interface vlan-interface vlan20 vrf vrf1
admin@Leaf4# set l3-interface vlan-interface vlan20 address 192.168.0.3 prefix-length 24
admin@Leaf4# set l3-interface vlan-interface vlan20 address 2002:0:0:1::3 prefix-length 64
admin@Leaf4# set l3-interface vlan-interface vlan30 vrf vrf1
admin@Leaf4# set l3-interface vlan-interface vlan30 address 172.168.0.3 prefix-length 24
admin@Leaf4# set l3-interface vlan-interface vlan30 address 2003:0:0:1::3 prefix-length 64
admin@Leaf4# set l3-interface vlan-interface vlan20 router-mac 00:00:20:00:00:FE
admin@Leaf4# set l3-interface vlan-interface vlan30 router-mac 00:00:30:00:00:FE
admin@Leaf4# set protocols bgp local-as 65001
admin@Leaf4# set protocols bgp router-id 10.226.14.48
admin@Leaf4# set protocols bgp neighbor 10.226.14.207 remote-as internal
admin@Leaf4# set protocols bgp neighbor 10.226.14.207 update-source 10.226.14.48
admin@Leaf4# set protocols bgp neighbor 10.226.14.207 evpn activate true
admin@Leaf4# set protocols bgp neighbor 10.226.14.208 remote-as internal
admin@Leaf4# set protocols bgp neighbor 10.226.14.208 update-source 10.226.14.48
admin@Leaf4# set protocols bgp neighbor 10.226.14.208 evpn activate true
admin@Leaf4# set protocols bgp neighbor 10.226.14.24 remote-as internal
admin@Leaf4# set protocols bgp neighbor 10.226.14.24 update-source 10.226.14.48
admin@Leaf4# set protocols bgp neighbor 10.226.14.24 evpn activate true
admin@Leaf4# set protocols bgp ipv4-unicast
admin@Leaf4# set protocols bgp evpn advertise-all-vni
admin@Leaf4# set protocols bgp evpn advertise ipv4-unicast
admin@Leaf4# set protocols bgp evpn advertise ipv6-unicast
admin@Leaf4# set protocols bgp evpn advertise-svi-ip
admin@Leaf4# set protocols bgp vrf vrf1 local-as 65001
admin@Leaf4# set protocols bgp vrf vrf1 router-id 48.48.48.48
admin@Leaf4# set protocols bgp vrf vrf1 evpn advertise ipv4-unicast
admin@Leaf4# set protocols bgp vrf vrf1 evpn advertise ipv6-unicast
admin@Leaf4# set protocols evpn mh
startup-delay 60
admin@Leaf4# set protocols evpn mh redirect-off
admin@Leaf4# set protocols lldp enable true
admin@Leaf4# set protocols ospf router-id 48.48.48.48
admin@Leaf4# set protocols ospf network 10.226.14.202/32 area 0.0.0.0
admin@Leaf4# set protocols ospf network 10.226.14.48/32 area 0.0.0.0
admin@Leaf4# set protocols ospf network 10.226.15.68/30 area 0.0.0.0
admin@Leaf4# set protocols ospf network 10.226.15.76/30 area 0.0.0.0
admin@Leaf4# set vlans vlan-id 20 l3-interface vlan20
admin@Leaf4# set vlans vlan-id 30 l3-interface vlan30
admin@Leaf4# set vlans vlan-id 99 l3-interface vlan99
admin@Leaf4# set vlans vlan-id 3011 l3-interface vlan3011
admin@Leaf4# set vlans vlan-id 3012 l3-interface vlan3012
admin@Leaf4# set vxlans source-interface lo address 10.226.14.202
admin@Leaf4# set vxlans vni 10020 decapsulation mode service-vlan-per-port
admin@Leaf4# set vxlans vni 10020 vlan 20
admin@Leaf4# set vxlans vni 10020 arp-nd-suppress disable false
admin@Leaf4# set vxlans vni 10030 decapsulation mode service-vlan-per-port
admin@Leaf4# set vxlans vni 10030 vlan 30
admin@Leaf4# set vxlans vni 10030 arp-nd-suppress disable false
admin@Leaf4# set vxlans vni 99 vlan 99
admin@Leaf4# set vxlans vrf vrf1 l3-vni 99
admin@Leaf4# commit

...

In addition to the above show command to verify the results, you can also use the run show vxlan mcast-tunnel VNIvni command to view the establishment of the BUM tunnel.

...