Run the command set protocols bgp neighbor evpn activate to enable or disable the BGP peer or peer group within the EVPN address family to enable EVPN route exchange with the specified BGP peer.
...
set protocols bgp [vrf <vrf-name>] neighbor <bgp-peer> evpn activate <true | false>
Parameter
Parameter | Description |
vrf <vrf-name> | Specifies the name of the VRF. |
neighbor <bgp-peer> | Specifies the BGP neighbor IPv4 or IPv6 address. |
| activate <true | false> | Enables or disables the address family for the specified neighbor
|
Example
- Configure the device to enable EVPN BGP route exchange with peer 3.3.3.3 in VRF BLUE.
...