...
set protocols bgp [vrf <vrf-name>] neighbor {neighbor <ip>|<bgppeer>| peer-group <peer-group> | interface <interface>} peer peer-group <peergroup>
delete protocols bgp [vrf <vrf-name>] neighbor {neighbor <ip>|<bgppeer>| peer-group <peer-group> | interface <interface>} peer peer-group <peergroup>
Parameter
Parameter | Description | |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. | |
| neighbor {<ip>|<bgppeer>|<interface>} | Neighbor can be an IPv4 address or an IPv6 address or an interface to use for the neighbor <ip> | Specifies the IP address of a peer. |
| peer-group <peer-group> | Specifies a peer group. | |
| interface <interface> | Specifies an interface for BGP connection. | |
| peer-group <peergroup> | Specifies a peer group name. The value is a string. |
...
Instead of specifying properties of each individual peer, you can define one or more peer groups and associate all the attributes common to that peer session to a peer group. A peer needs to be attached to a peer group only once, when it then inherits all address families activated for that peer group.
Note:
If the peer you want to add to a group already exists in the BGP configuration, delete it first, than add it to the peer group.
Example
• This example adds two peers to a peer group leaf1.
...