Before you deploy switches, configure each switch model that you want to manage with AmpCon™AmpCon-DC. If not, the default port number ranges and PicOS® built-in PicOS images are used to deploy switches with these switch models.
| Table of Contents | ||
|---|---|---|
|
Prerequisites
...
Configuring a Switch Model
...
In the AmpCon-DC UI, click Service > Switch Model.
Optional: Update Refresh the supported switch model list:
Click Update Switch Model.
Click Yes to confirm the update.
...
In the Switch Model drop-down list, select the switch model that you want to configure.
...
Configure the port number range for each speed.
In the Deployed ONIE Image drop-down list, select the
...
PicOS image that you want to install for this switch model.
Note: If the PicOS image to install is not listed here, upload the PicOS image and its MD5 file to AmpCon-DC.
...
For more information, see Uploading Images.
...
Click Save.
Optional: Resetting a Switch Model
To reset a switch model, follow these steps:Note:
In the AmpCon-DC UI, click Service > Switch Model.
Click Reset.
Click Save.
After you reset the a switch model, the port number range for each speed is set to zero, and the image for this switch model PicOS image in the Deployed ONIE Image drop-down list is reset to the default version.
...
In the AmpCon-DC UI, click Service > Switch Model.
...
built-in image.