You can install the AmpCon-DC server by importing the .ova image file to a virtual machine management platform like VirtualBox.VirtualBox is used in the following installation steps. The steps are similar for other virtual machine management platforms that support importing .ova files.on VirtualBox for lab purposes only. Production environments require a proper enterprise-scale virtualization solution as described in Supported Deployments. For how to use VirtualBox in general, see the Oracle VirtualBox documentation.
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Prerequisites
Before you install the AmpCon-DC server, ensure that the following prerequisites are met:
The Ensure that the installation requirements are met.The
Download the compressed AmpCon-DC server installation package is downloaded.
...
image file by going to the FS AmpCon-DC website
...
and then clicking AmpCon-DC for
...
VirtualBox 2.1.
...
x Software
...
Installation procedure
...
in the Resources section.
Put the compressed AmpCon-DC server image file to the machine where the hypervisor exists, and unzip the file.
Installation Procedure
Open the VirtualBox console, and then click File > Import Appliance.
...
Select Local File System, and then select the AmpCon-DC server .ova image file that you previously downloaded.
...
Confirm the import settings for the .ova file, and then click Finish.
...
Wait for the importing progress to completeprocess to finish. Once completed, the virtual machine is successfully imported, and the AmpCon-DC server is installed.
Note: The AmpCon-DC server is installed in the /usr/share/automation/server directory. Currently, you can’t customize the installation directory.
...
Check the configurations settings of the imported virtual machine.
...
Starting Start the imported virtual machine by clicking the new virtual machine and then clicking Start.
...
Modify the network interface configuration.
...
.
a. Log in to the virtual machine with the default username (pica8) and password (pica8).
b. Modify the IP address with the real IP address of the virtual machine.
sudo vi /etc/netplan/00-installer-config.yaml |
|---|
...
c. Apply the network interface configuration by running the following command:
sudo netplan apply |
|---|
Start the AmpCon-DC server:
a. Go to the AmpCon-DC installation directory by running the following
...
command
...
:
cd /usr/share/automation/server |
|---|
b. Start the AmpCon-DC server by running the following command:
sudo ./start.sh |
|---|
...
Now the AmpCon-DC server is installed and started.
What to Do Next
After you install the AmpCon-DC server, you need to import the AmpCon-DC License, and add system configurations.
...