You can install the AmpCon-DC server by importing the .ova image file to a virtual machine management platform like VMware ESXi.VMware ESXi is used in the following installation steps. The steps are similar for other virtual machine management platforms that support importing .ovf files.on VMware ESXi 6.7, 7.0, 8.0. For how to use VMware ESXi in general, see the VMware ESXi documentation.
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Prerequisites
Before you install the AmpCon-DC server, ensure that the following prerequisites are met:
The Ensure that the installation requirements are met.
You have downloaded Download the compressed AmpCon-DC server image file by going to the FS AmpCon-DC website and then clicking AmpCon™AmpCon-DC for VMWare ESXi 2.1.0 x Software in the Resources section.
You have put Put the zipped compressed AmpCon-DC server image file to the machine where VMware ESXi the hypervisor exists, and unzipped unzip the file.
Installation Procedure
Open the VMware ESXi console, and then click Create / Register VM.
...
Select Deploy a virtual machine from an OVF or OVA file, and then click Next.
...
Enter a the virtual machine name, upload the AmpCon-DC server .ovf and .vmdk files that you previously downloaded, and then click Next.
...
Confirm the storage type and datastore, and then click Next.
...
In the Network mappings drop-down list , select Wuhan Networkof the Deployment Options window, select the network adapter to which the virtual machine is connected, and then click Next.
...
Click Finish.
...
Wait for the importing process to finish. Once completed, the virtual machine is successfully
...
imported, and the AmpCon-DC server is installed.
Note: The AmpCon-DC server is installed in the /usr/share/automation/server directory. Currently, you can’t customize the installation directory.
On the Open VMware ESXi console, click the new virtual machine name that you specified in step 3.
...
Start the AmpCon-DC server:
a. Go to the AmpCon-DC installation directory by running the following command:
cd /usr/share/automation/server |
|---|
b. Start the AmpCon-DC server by running the following command:
sudo ./start.sh |
|---|
Now the AmpCon-DC server is installed and started.
What to Do Next
After you install the AmpCon-DC server, you need to import the AmpCon-DC License, and add system configurations.
...