System LED Definition
Feature | Detailed Description | Comment |
Diagnosis LED | l Solid green – All OK, CLI prompt available l Blinking green – Boot-up in progress l Solid amber –System self-diagnostic test has detected a fault (Fan, thermal or any interface fault.). | At front |
FAN LED | l Solid green –System FAN operating normally. l Solid amber –Fan tray present buy system FAN is fault. l OFF – System OFF. | At front |
PS1 LED | l Solid green –This power is operating normally. l Solid amber –PWR present but not power on or this power is fault. l OFF – Power supply not present. | At rear |
PS2 LED | l Solid green –This power is operating normally. l Solid amber –PWR present but not power on or this power is fault. l OFF – Power supply not present. | At front |
Locator LED | l Not supported. | At front |
Port LED Definition
QSFP56-DD ports LED Indications
Only the 1st LED is used when running at 400G without breakout. |
|
|
|
Only the 1st LED is used when running at 100G without breakout. |
|
|
|
All four LEDs are used when running at 4 x100G in breakout mode. |
|
|
|
Management Port LED SFP+
Feature | Detailed Description |
SFP+ 10G management port LED | l Off – No Link l On/Flashing Green –SFP+ port has a valid link at 10G. Flashing indicates activity. l On/Flashing Amber –SFP+ port has a valid link at 1G. Flashing indicates activity. |
RJ45 10/100/1G Management port LED | l Off – No Link l On/Flashing Green –Has a valid link. Flashing indicates activity. |