The set routing route-map match ip prefix-len command matches the destination IP address prefix length or the next-hop address prefix length of the routes.
The delete routing route-map match ip prefix-len command restores the default behavior of not matching the address prefix length of the routes.
Command Syntax
set routing route-map <route-map-name> <NUMBER> match ip <address|next-hop> prefix-len <prefix-len>
delete routing route-map <route-map-name> <NUMBER> match ip <address|next-hop> prefix-len <prefix-len>
Parameter
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
<NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
ip <address|next-hop> | Specifies the type of matching address.
|
| prefix-len <prefix-len> | Specifies the prefix length to be matched. The value is an integer that ranges from 0 to 32. |
Example
- Configure a match clause in the route map to match the address prefix length of the routes.
admin@Xorplus# set routing route-map GlobalMap 10 match ip address prefix-len 24 admin@Xorplus# commit