The set routing route-map action originator-id command modifies the originator-id attribute of the BGP route entry with the value configured in the action clause.
The delete routing route-map action originator-id command restores the default behavior of not modifying the originator-id attribute of the BGP route entry.
Command Syntax
set routing route-map <route-map-name> <NUMBER> action originator-id <ipv4-address>
delete routing route-map <route-map-name> <NUMBER> action originator-id <ipv4-address>
Parameter
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
<NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
originator-id <ipv4-address> | Specifies originator-id attribute of the BGP route entry. The value is an IPv4 address. |
Example
- Configure a action clause in the route map to modify the originator-id attribute of the BGP route:
admin@Xorplus# set routing route-map GlobalMap 10 action originator-id 10.10.10.1 admin@Xorplus# commit