The set protocols bgp neighbor prefix-list command configures an IPv4 prefix list to advertise or receive routes from peers.
The delete protocols bgp neighbor prefix-list command disables this feature.
Command Syntax
set protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> prefix-list <prefix-list-v4> {in|out}
delete protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <bgppeer> prefix-list <prefix-list-v4> {in|out}
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <bgppeer> | Specifies the IP address of a peer or a Peer-Group. |
| prefix-list <prefix-list-v4> | Specifies the IPv4 prefix list. |
| {in|out} | Sets the filter policy to apply to either the received routes from the neighbor (in) or the advertised routes to the neighbor (out). |
Example
• This example configures an IPv4 prefix list to receive routes from peers.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 prefix-list List1 in admin@XorPlus# commit