The set protocols bgp neighbor route-map command applies a route map to incoming or outgoing routes. It configures the route map for modifying the default attributes of the route.
The delete protocols bgp neighbor route-map command removes a route map.
Command Syntax
set protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <protocol bgppeer> route-map <route-map> {in|out}
delete protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <protocol bgppeer> route-map <route-map> {in|out}
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <protocol bgppeer> | Specifies an IP address of neighbor. |
| route-map <route-map> | Specifies the name of the route map. |
| <in|out> | Sets the route map policy to apply to either the received routes from the neighbor (in) or the advertised routes to the neighbor (out). |
Example
• This example applies a route map to the incoming routes.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 route-map map1 in admin@XorPlus# commit