Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 8 Next »


The set protocols bgp ipv4-unicast aggregate-address as-set command creates an aggregate address entry  in IPv4 format in the BGP routing table.
The delete protocols bgp ipv4-unicast aggregate-address as-set command removes the specified aggregate address entry.


Command Syntax

set protocols bgp [vrf <vrf-name>ipv4-unicast aggregate-address <ipv4/prefixlen> [as-set | summary-only]

delete protocols bgp [vrf <vrf-name>ipv4-unicast aggregate-address <ipv4/prefixlen> [as-set | summary-only]


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

aggregate-address <ipv4/prefixlen>ipv4 specifies an aggregate address in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255. prefixlen specifies the number of bits in the address mask in CIDR format (x), where x is a decimal number from 0 to 128.
as-setOptional. The AS_PATH attribute advertised for this route will contain an AS_SET consisting of all AS numbers contained in all paths that are being summarized.
summary-onlyOptional. Creates the aggregate route but also suppresses advertisements of more-specific routes to all neighbors.


Example
• This example creates an aggregate address entry in the BGP routing table.

admin@XorPlus# set protocols bgp ipv4-unicast aggregate-address 10.0.0.0/8
admin@XorPlus# commit


  • No labels