After you deploy a switch, you can push configurations to the switch by using the Push Config function.
If you haven’t added the switch configurations, add switch configurations with the configurations that you want to push to switches. For more information, see Adding Switch Configurations.
Note: Ensure that you have created global configuration files and configuration template files with configurations that you want to push to each switch. For more information, see Adding Global Configurations and Adding Configuration Templates.
Procedure
To push configurations to one or multiple switches, follow these steps:
In the AmpCon™-DC UI, click Service > Configuration Template.
In the Push Config tab, select a folder, and then click Add Node. A node represents a configuration file.
Enter the node name and its description (optional).
Click OK to save the node.
Click the node that you just created, and click Edit.
Add configurations that you want to push to switches by using either of the following ways:
Enter the configurations that you want to push to switches manually.
Using the configuration template that you created before:
a. Click Generate Config.
b. Select a configuration template file from the drop-down list.
c. Click Next, and enter the value for each variable.
d. Click Save.
Click Push Config, and select the switches to apply these configurations.
You can select switches one by one by using the Config Switch tab or select all switches in a group by using the Config Group tab. For how to add groups, see Managing Groups.
Click OK to start the configuration pushing.
Optional: Verifying Pushing Configuration Logs
To verify whether the configuration is pushed to each switch successfully, follow these steps:
In the AmpCon-DC UI, click Service > Configuration Template.
In the Push Config tab, click Push Config Logs.
Click Task List, check whether the pushing status is “success”.
If the pushing status is not “success”, click Push Log to check logs for troubleshooting.
Add Comment