The run show interface stm command displays the total STM resources that are available and how many STM entries are in use.
Note:
It is allowed to configure the firewall filter rule only when there are available STM resources.
Command Syntax
run show interface stm
Parameter
None.
Example
• Show the information of STM resources.
admin@Xorplus# run show interface stm Total stm resource: Share-mode: 5 number of host routes: 32768 number of mac unicast addresses: 32768 number of firewall ingress tables: 896 number of firewall egress tables: 510 number of IPv4 unicast routes: 5000 number of IPv6 unicast routes: 500 Stm resource in use: number of firewall ingress tables: 2 number of firewall egress tables: 29
The item number of firewall egress tables is used for describing STM resources of CoPP. By default, the value of number of firewall egress tables in Stm resource in use: is 21 as have been used by the default CoPP configurations.