S5860-24XB-U Switch

LED Name

Status

Detailed Description

System LED

OFF

No power supply.

Blinking green

Boot-up in progress.

Solid green

The system completes initialization and works normally.

Solid amber

• Temperature exceeds alarm threshold

• Power mixing

Solid red

• System Failure.

  • Board voltage abnormalities.

  • Other hardware and software abnormalities, such as a chip cannot be initialized.

• The temperature of any part of the machine exceeds the maximum temperature allowed by the device.

Blinking red

• Long pressing the reset button, it will flash green for the first 5S, and then flash red until the information is collected and the whole machine is reset.

• An optical module short-circuit fault occurs; (see CPLD register).

FAN LED

Solid green

System FAN operating normally.

Solid red

• Any fan has failed:

  • Model does not match system.

  • The actual speed read is less than 3000 rpm (judged as stalled).

  • Fan power_ok abnormality (see CPLD register).

• Any fan is not in position (see CPLD register);

PS LED

OFF

Power supply not present.

Solid green

This power is operating normally.

Solid red

• Power module failure, no output of 12V, 54V.

• Power module not connected to AC power cord

  • Cannot read the model number of the power supply module.

  • Can read the model number, but does not match the system.

MGMT LED

OFF

No Link.

Solid green

Port linked operating at 1000M.

Solid amber

Port linked operating at 10M or 100M.

Flashing

Transmit/Receive is activity.

PoE LED

(controlled by PoE button on the front panel)

Solid green

Port LEDs indicate data switching status.

Solid amber

Port LEDs indicate PoE power supply status.

Feature

Detailed Description

Non-PoE

(controlled by PoE button on the front panel)

• Off – No Link

• Solid Green –Port links up at 1G/2.5G/5G/10G.

• Solid Amber –Port links up at 100M.

• Flashing –Transmit/Receive is activity.

PoE

(controlled by PoE button on the front panel)

• Solid Green –PoE Power On

• Off –PoE Power Off

• Solid Amber –Port PoE overload or failure

Feature

Detailed Description

SFP+ 10G port LED

• Off – No Link

• Solid Green –Port links up at 10G or 1G.

• Flashing –Transmit/Receive is activity.

Feature

Detailed Description

SFP28 25G port LED

• Off – No Link

• Solid Green –Port links up at 1G/10G/25G.

• Flashing –Transmit/Receive is activity.