The set protocols neighbour inspection trust-port command can be used to configure ND inspection trust port.
The delete protocols neighbour inspection trust-port command deletes the configuration.
Command Syntax
set protocols neighbour inspection trust-port <port>
delete protocols neighbour inspection trust-port <port>
Parameters
Parameter | Description |
trust-port <port> | Specifies the trust port. The value could be a physical port or LAG port. The value is like ge-1/1/1, te-1/1/3, ae1, etc. NOTE: The device does not configure trust ports by default. |
Usage Guidelines
This feature specifies the trust port, after specified, the device does not check ND message on that port and forwards the message.
Example
Configure a ND inspection trust-port ge-1/1/1.
admin@PICOS# set protocols neighbour inspection trust-port ge-1/1/1 admin@PICOS# commit