Interface Configuration Commands

This section contains descriptions of the CLI commands that this chapter references.

• interface aggregate-balancing hash-mapping field ethernet-destination-address disable
• interface aggregate-balancing hash-mapping field ethernet-source-address disable
• interface aggregate-balancing hash-mapping field ethernet-type disable
• interface aggregate-balancing hash-mapping field ingress-interface disable
• interface aggregate-balancing hash-mapping field ip-destination disable
• interface aggregate-balancing hash-mapping field ip-protocol disable
• interface aggregate-balancing hash-mapping field ip-source disable
• interface aggregate-balancing hash-mapping field port-destination disable
• interface aggregate-balancing hash-mapping field port-source disable
• interface aggregate-balancing hash-mapping field vlan disable
• interface aggregate-ethernet <lag_name> aggregated-ether-options flow-control
• interface aggregate-ethernet <lag_name> aggregated-ether-options min-selected-port
• interface aggregate-ethernet <lag_name> backup-port delay
• interface aggregate-ethernet <lag_name> backup-port interface
• interface aggregate-ethernet <lag_name> backup-port mode
• interface aggregate-ethernet <lag_name> crossflow enable
• interface aggregate-ethernet <lag_name> crossflow local-control
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling egress
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ether-type
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ingress
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling mode
• interface aggregate-ethernet <lag_name> family ethernet-switching native-vlan-id
• interface aggregate-ethernet <lag_name> hash-mapping mode
• interface aggregate-ethernet <lag_name> mtu
• interface aggregate-ethernet <lag_name> snmp-trap
• interface aggregate-ethernet <lag_name> static-ethernet-switching mac-address <macaddr> vlan
• interface aggregate-ethernet <lag_name> storm-control <mode> pps
• interface cut-through-mode
• interface ecmp max-path
• interface ethernet-switching-options buffer queue-limit
• interface ethernet-switching-options mac-table-aging-time
• interface gigabit-ethernet <port> backup-port delay
• interface gigabit-ethernet <port> backup-port interface
• interface gigabit-ethernet <port> backup-port mode
• interface gigabit-ethernet <port> crossflow enable
• interface gigabit-ethernet <port> crossflow local-control
• interface gigabit-ethernet <port> description
• interface gigabit-ethernet <port> disable
• interface gigabit-ethernet <port> ether-options flow-control
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling egress
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ether-type
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ingress
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling mode
• interface gigabit-ethernet <port> family ethernet-switching native-vlan-id
• interface gigabit-ethernet <port> family ethernet-switching vlan members <vlan-id> untagged
• interface gigabit-ethernet <port> link-fault-signaling ignore-local-fault <boolean>
• interface gigabit-ethernet <port> link-fault-signaling ignore-remote-fault <boolean>
• interface gigabit-ethernet <port> mac-learning <boolean>
• interface gigabit-ethernet <port> mtu
• interface gigabit-ethernet <port> power-preemphasis-level
• interface gigabit-ethernet <port> snmp-trap
• interface gigabit-ethernet <port> static-ethernet-switching mac-address <mac-address> vlan <vlan-id>
• interface gigabit-ethernet <port> storm-control <mode> kbps
• interface gigabit-ethernet <port> storm-control <mode> pps
• interface gigabit-ethernet <port> storm-control <mode> ratio <value>
• interface gigabit-ethernet <port> wred queue <value> drop_probability
• interface gigabit-ethernet <port> wred queue <value> ecn_thresh
• interface gigabit-ethernet <port> wred queue <value> enable
• interface gigabit-ethernet <port> wred queue <value> max_thresh
• interface gigabit-ethernet <port> wred queue <value> min_thresh
• interface max-acl-rule-limit <egress/ingress>
• interface max-route-limit
• IPv6 Neighbor Discovery Protocol Command Reference
  • set l3-interface routed-interface ipv6-nd adv-interval-option
  • set l3-interface routed-interface ipv6-nd home-agent-config-flag
  • set l3-interface routed-interface ipv6-nd home-agent-lifetime
  • set l3-interface routed-interface ipv6-nd home-agent-preference
  • set l3-interface routed-interface ipv6-nd managed-config-flag
  • set l3-interface routed-interface ipv6-nd mtu
  • set l3-interface routed-interface ipv6-nd other-config-flag
  • set l3-interface routed-interface ipv6-nd prefix off-link
  • set l3-interface routed-interface ipv6-nd prefix preferred-lifetime
  • set l3-interface routed-interface ipv6-nd prefix router-address
  • set l3-interface routed-interface ipv6-nd prefix valid-lifetime
  • set l3-interface routed-interface ipv6-nd ra-fast-retrans
  • set l3-interface routed-interface ipv6-nd ra-interval
  • set l3-interface routed-interface ipv6-nd ra-lifetime
  • set l3-interface routed-interface ipv6-nd reachable-time
  • set l3-interface routed-interface ipv6-nd router-preference
  • set l3-interface routed-interface ipv6-nd suppress-ra
  • set l3-interface vlan-interface ipv6-nd adv-interval-option
  • set l3-interface vlan-interface ipv6-nd home-agent-config-flag
  • set l3-interface vlan-interface ipv6-nd home-agent-lifetime
  • set l3-interface vlan-interface ipv6-nd home-agent-preference
  • set l3-interface vlan-interface ipv6-nd managed-config-flag
  • set l3-interface vlan-interface ipv6-nd mtu
  • set l3-interface vlan-interface ipv6-nd other-config-flag
  • set l3-interface vlan-interface ipv6-nd prefix off-link
  • set l3-interface vlan-interface ipv6-nd prefix preferred-lifetime
  • set l3-interface vlan-interface ipv6-nd prefix router-address
  • set l3-interface vlan-interface ipv6-nd prefix valid-lifetime
  • set l3-interface vlan-interface ipv6-nd ra-fast-retrans
  • set l3-interface vlan-interface ipv6-nd ra-interval
  • set l3-interface vlan-interface ipv6-nd ra-lifetime
  • set l3-interface vlan-interface ipv6-nd reachable-time
  • set l3-interface vlan-interface ipv6-nd router-preference
  • set l3-interface vlan-interface ipv6-nd suppress-ra
• L3 Interface
  • run clear l3-interface statistics
  • run show l3-interface
  • run show l3-interface loopback
  • run show l3-interface routed-interface
  • run show l3-interface vlan-interface
  • set l3-interface loopback address
  • set l3-interface loopback disable
  • set l3-interface loopback vrf
  • set l3-interface routed-interface address
  • set l3-interface routed-interface description
  • set l3-interface routed-interface dhcp
  • set l3-interface routed-interface mtu
  • set l3-interface routed-interface pmtu-discovery
  • set l3-interface routed-interface rate-limit
  • set l3-interface routed-interface vrf
  • set l3-interface vlan-interface address prefix-length
  • set l3-interface vlan-interface dhcp
  • set l3-interface vlan-interface mtu
  • set l3-interface vlan-interface pmtu-discovery
  • set l3-interface vlan-interface rate-limit
  • set l3-interface vlan-interface vrf
• Port Security Commands
  • run clear port-security dynamic address
  • run clear port-security dynamic interface
  • run clear port-security port-error
  • run clear port-security sticky address
  • run clear port-security sticky interface
  • run show port-security address
  • run show port-security brief
  • run show port-security interface
  • set interface ethernet-switching-options port-error-discard timeout
  • set interface gigabit-ethernet port-security block
  • set interface gigabit-ethernet port-security mac-address vlan
  • set interface gigabit-ethernet port-security mac-limit
  • set interface gigabit-ethernet port-security sticky
  • set interface gigabit-ethernet port-security violation
• Routed Interface
  • run show interface routed-interface brief
  • run show vlans routed-vlan
  • set interface aggregate-ethernet routed-interface enable
  • set interface aggregate-ethernet routed-interface name
  • set interface aggregate-ethernet routed-interface sub-interface vlan-id
  • set interface gigabit-ethernet routed-interface enable
  • set interface gigabit-ethernet routed-interface name
  • set interface gigabit-ethernet routed-interface sub-interface
  • set vlans reserved-vlan
• run show interface diagnostics tdr
• run show interface port-index-mapping
• set interface aggregate-ethernet
• set interface aggregate-ethernet aggregated-ether-options lacp
• set interface aggregate-ethernet aggregated-ether-options lacp fallback enable
• set interface aggregate-ethernet aggregated-ether-options lacp fallback timeout
• set interface aggregate-ethernet description
• set interface aggregate-ethernet disable
• set interface aggregate-ethernet family ethernet-switching port-mode
• set interface aggregate-ethernet family ethernet-switching vlan members
• set interface bpdu-tunneling destination-mac
• set interface ecmp hash-mapping dlb-assigned
• set interface ecmp hash-mapping dlb-normal
• set interface ecmp hash-mapping dlb-optimal
• set interface ecmp hash-mapping field ingress-interface disable
• set interface ecmp hash-mapping field ip-destination disable
• set interface ecmp hash-mapping field ip-protocol disable
• set interface ecmp hash-mapping field ip-source disable
• set interface ecmp hash-mapping field port-destination disable
• set interface ecmp hash-mapping field port-source disable
• set interface ecmp hash-mapping field vlan disable
• set interface ecmp hash-mapping randomized-load-balancing
• set interface ecmp hash-mapping round-robin-load-balancing
• set interface ecmp hash-mapping symmetric
• set interface gigabit-ethernet auto-speeds
• set interface gigabit-ethernet breakout
• set interface gigabit-ethernet breakout-type
• set interface gigabit-ethernet cdr
• set interface gigabit-ethernet duplex auto
• set interface gigabit-ethernet ether-options 802.3ad
• set interface gigabit-ethernet family ethernet-switching bpdu-tunneling protocol
• set interface gigabit-ethernet family ethernet-switching port-mode
• set interface gigabit-ethernet family ethernet-switching vlan members
• set interface gigabit-ethernet fec
• set interface gigabit-ethernet speed
• set interface gigabit-ethernet up-mode
• set management-ethernet-speed eth0
• show interface aggregate-ethernet <lag_name>
• show interface aggregate-ethernet <lag_name> dot1q-tunneling
• show interface bpdu-tunneling
• show interface brief
• show interface detail
• show interface diagnostics optics all
• show interface ecmp max-path
• show interface flexlink
• show interface gigabit-ethernet <interface>
• Uplink Failure Detection Commands
  • run show interface ufd
  • set interface ufd link-to-disable
  • set interface ufd link-to-monitor