Command Syntax
run show multicast interface [addr]

Parameter
•[addr] Display information about addresses of multicast IPv4 interfaces

Example
• This example is to show multicast interface address:

admin@XorPlus# run show multicast interface address 
Interface Addr Subnet Broadcast P2Paddr 
loopback 127.0.0.1 127.0.0.1/32 0.0.0.0 0.0.0.0 
vlan-2 192.168.1.1 192.168.1.0/24 0.0.0.0 0.0.0.0 
vlan-3 192.168.2.1 192.168.2.0/24 0.0.0.0 0.0.0.0 
admin@XorPlus# 
admin@XorPlus# run show multicast interface 
Interface State Vif/PifIndex Addr Flags
vlan4 UP 3/264 10.10.60.10 MULTICAST BROADCAST KERN_UP
vlan5 UP 4/266 10.10.61.10 MULTICAST BROADCAST KERN_UP

Browser not supported