The set protocols spanning-tree pvst interface mode command configures the link type of a port for Rapid-PVST+ mode.

Command Syntax

set protocols spanning-tree pvst interface <interface-name> mode <point-to-point | shared>

Parameter

Parameter

Description

interface <interface-name>

Specifies a port name. The value is a string that can be set to a physical port name or a LAG port.

mode <point-to-point | shared>

Specifies the link type of the port. The value could be point-to-point or shared.

point-to-point: specifies the current Ethernet port to work in full-duplex mode to achieve fast convergence.
shared: specifies the current Ethernet port to work in half-duplex mode.

The default value is point-to-point.

Example

admin@Xorplus# set protocols spanning-tree pvst interface ge-1/1/1 mode point-to-point
admin@Xorplus# commit

Browser not supported