The show mlag peer command displays the status of MLAG peer device of an MLAG domain.

Command Syntax

show mlag peer [domain-id]

Parameter

Parameter	Description
domain-id	Optional. Specifies the MLAG domain ID.

Example

Show the status of MLAG peer device of an MLAG domain.

root@Xorplus# run show mlag peer
Domain-id       Peer       System-mac         State    Link-status
---------     -----------        -----------------     -------   -----------
2         10.10.10.1     48:0f:cf:ad:70:9f     FULL     UP 
1         10.10.10.1     48:0f:cf:ad:70:9f     FULL     UP

Browser not supported