accton_as4600_54t Switch
- Tracy Yang (Unlicensed)
·System LED indicator light：
LED | light status | LED meanings |
|---|---|---|
Diag | Green | System self-diagnostic test successfully completed. |
| Amber | System self-diagnostic test has detected a fault. | |
| Off | self-diagnostic test OFF. | |
PWR1/PWR2 | Green | This power is operating normally. |
| Amber | This power is present but not power on or fault. | |
| Off | Power supply not present. | |
FAN1/FAN2 | Green | System FAN operating normally. |
| Amber | Fan tray present by system FAN is fault. | |
| Off | System OFF. | |
Module1/Module2 | Not supported. | |
·Management port LED：
port | light status | LED meanings |
Management port
| Black(L and R) | Does not connected |
Green/black(L) | Connected ok | |
green and blinking(R) | Connected ok and transmitted |
·10/100/1000 RJ45 port LED:
LED | light status | LED meanings |
|---|---|---|
10/100/1000 RJ45
| black(L and R) | Link down(working in 10M mode, the L is black) |
green(L) and blinking green(R) | Port is working in 1G mode and already receiving or sending data | |
green(L) | Port is working in 1G model and link up | |
Amber(L) and blinking green(R) | Port is working in 100M mode and already receiving or sending data | |
amber(L) | Port is working in 100M model and link up |
·10G Optical SFP+ port LED：
LED | light status | LED meanings |
|---|---|---|
10G Optical SFP+ port LED | black | Link down or The module is not installed |
green | 1G/10G port data Link | |
green and blinking | 1G/10G Port data receiving or sending |
Copyright © 2025 Pica8 Inc. All Rights Reserved.