The set protocols pim interface use-source command is used to configure the source IP address.

Command Syntax

set protocols pim interface <interface-name> use-source <source-ip>

Parameter

Parameter	Description
interface <interface-name>	Specifies a L3 VLAN interface. The value is a string.
use-source <source-ip>	Specifies the source IP address.

Usage Guidelines

If you have multiple addresses configured on a particular interface and would like pim to use a specific source address associated with that interface.

Example

Configure the Designated Router priority for the PIM interface vlan-2 to 100.

admin@Xorplus# set protocols pim interface vlan-2 drpriority 100
admin@Xorplus# commit

Browser not supported