set firewall filter sequence description

To configure the filter sequence description, use the set firewall filter sequence description command in L2/L3 configuration mode. To remove the filter sequence description, use the delete form of the command.

Command Syntax

set firewall filter filter-name sequence sequence-number description sequence-description
delete firewall filter filter-name sequence number description

Parameters

filter-name	Filter name.
sequence-number	The sequence number, smaller values representing higher priorities. The range is 0-9999.
sequence-description	The sequence description.

Example

The following example configures the description for sequence 10 of the MyFilter filter:

admin@Switch# set firewall filter MyFilter sequence 10 description "My filter sequence"

The following example removes the description for sequence 10 of the MyFilter filter:

admin@Switch# delete firewall filter MyFilter sequence 10 description
Deleting: 
>   description: "My filter sequence"
OK