/
set protocols dot1x filter sequence from source-port

set protocols dot1x filter sequence from source-port

Owned by Tracy Yang (Unlicensed)
Mar 03, 2023

The set protocols dot1x filter sequence from source-port command configures the source port information of the matching packets based on the NAC-based ACL rules.


Command Syntax

set protocols dot1x filter <filter-name> sequence <sequence-number> from source-port <port-number>


Parameter

Parameter

Description

filter <filter-name>

Specifies the ACL filter name. The value is a string.

sequence <sequence-number>

Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.

source-port <port-number>

Specifies the source port of packets that match ACL rules. The value is an integer. It could be a port number or a range of port number, i.e. 6000; 6000..7000, which indicates port range from 6000 to 7000.


Example

  • Configure the source port of packets that match ACL rules to 7000.
admin@Xorplus# set protocols dot1x filter f1 sequence 2 from source-port 7000
admin@Xorplus# commit