set protocols dot1x filter sequence from destination-address-ipv6

The set protocols dot1x filter sequence from destination-address-ipv6 command configures the destination IPv6 address information of the matching packets based on the NAC-based ACL rules.

Command Syntax

set protocols dot1x filter <filter-name> sequence <sequence-number> from destination-address-ipv6 <ipv6-address>

Parameter

Parameter	Description
filter <filter-name>	Specifies the ACL filter name. The value is a string.
sequence <sequence-number>	Specifies filter sequence number. The value is an integer that ranges from 0 to 9999.
destination-address-ipv6 <ipv6-address>	Specifies the destination IPv6 address of packets that match ACL rules. It must be an IPv6 subnet in address/prefix-length form. For example, 10::1/128.

Example

Configure the destination IPv6 address of packets that match ACL rules to 10::1/128.

admin@Xorplus# set protocols dot1x filter f1 sequence 2 from destination-address-ipv6 10::1/128
admin@Xorplus# commit