set firewall filter copp sequence from source-port
- Tracy Yang (Unlicensed)
The set firewall filter copp sequence from source-port command configures a firewall filter rule based on the source port for traffic classification.
Command Syntax
set firewall filter copp sequence <number> from source-port <port-number>
Parameter
Parameter | Description |
sequence <number> | Specifies filter sequence number. The value is an integer that ranges from 0 to 9999. The 18 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules. |
source-port <port-number> | Specifies the source port number or port number range, for example, 5000 or 7000..7050. |
Usage Guidelines
You can run the set firewall filter copp sequence from source-port command to configure a firewall filter rule based on the source port for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.
Example
• Configure a firewall filter rule based on the source port of 3222.
admin@XorPlus# set firewall filter copp sequence 51 from source-port 3222 admin@XorPlus# commit
Copyright © 2025 Pica8 Inc. All Rights Reserved.