set firewall filter copp sequence from ether-type
- Tracy Yang (Unlicensed)
The set firewall filter copp sequence from ether-type command configures a firewall filter rule based on the Ether-Type values for traffic classification.
Command Syntax
set firewall filter copp sequence <number> from ether-type <ether-type>
Parameter
Parameter | Description |
sequence <number> | Specifies filter sequence number. The value is an integer that ranges from 0 to 9999. The 18 integers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180 are not allowed to be used for sequence numbers in user-defined CoPP firewall filter rules. |
ether-type <ether-type> | Specifies an Ether-Type value. The value is an integer in decimal format that ranges from 1501 to 65535. |
Usage Guidelines
You can run the set firewall filter copp sequence from ether-type command to configure a firewall filter rule based on the Ether-Type for traffic classification so that the device processes packets matching the same firewall filter rule in the same manner.
Example
• Configure a firewall filter rule based on the Ether-Type value 34525.
admin@XorPlus# set firewall filter copp sequence 51 from ether-type 34525 admin@XorPlus# commit
Copyright © 2025 Pica8 Inc. All Rights Reserved.