set firewall filter sequence from destination-mac-address

To configure a filter sequence to match packets based on destination MAC address, use the set firewall filter sequence from destination-mac-address command in L2/L3 configuration mode. To remove the destination MAC address, use the delete form of the command.

Command Syntax

set firewall filter filter-name sequence number from destination-mac-address <mac-address>
delete firewall filter filter-name sequence number from destination-mac-address

Parameters

filter-name	Filter name.
number	Filter sequence number. The range is 0-9999.
mac-address	Destination MAC address.

Example

The following example configures sequence 2 of the MyFilter filter to match packets with destination MAC address 44:44:44:44:44:44:

admin@XorPlus# set firewall filter MyFilter sequence 2 from destination-mac-address 44:44:44:44:44:44

The following example removes the destination MAC address 44:44:44:44:44:44 from sequence 2 of the MyFilter filter:

admin@XorPlus# delete firewall filter MyFilter sequence 2 from destination-mac-address
Deleting: 
>   destination-mac-address: 44:44:44:44:44:44
OK