set firewall filter input routed-interface

To apply the filter to ingress packets on a routed interface, use the set firewall filter input routed-interface command in L2/L3 configuration mode. To remove the filter from ingress packets on a routed interface, use the delete form of the command.

Command Syntax

set firewall filter filter-name input routed-interface routed-interface-name
delete firewall filter filter-name input routed-interface routed-interface-name

Parameters

filter-name	Filter name.
routed-interface-name	Routed interface name.

Example

The following example applies the MyFilter filter to ingress packets at the rif-ge3 interface:

admin@Switch# set firewall filter MyFilter input routed-interface rif-ge3

The following example removes the MyFilter filter from ingress packets at the rif-ge3 interface:

admin@Switch# delete firewall filter MyFilter input routed-interface rif-ge3
Deleting: 
>   ge3
OK