/
set firewall filter sequence then action
set firewall filter sequence then action
- Tracy Yang
Owned by Tracy Yang
Nov 13, 2023
To configure the next action for a filter sequence, use the set firewall filter sequence then action command in L2/L3 configuration mode.
Command Syntax
set firewall filter filter-name sequence number then action { discard | forward }
Parameters
| filter-name | Filter name. |
| number | Filter sequence number. The range is 0-9999. |
| discard | Discard packets that meet all match conditions. |
| forward | Forward packets that meet all match conditions. |
Examples
The following example configures sequence 1 and 2 of the MyFilter filter to forward and discard matching packets, respectively.
admin@Switch# set firewall filter MyFilter sequence 1 then action forward admin@Switch# set firewall filter MyFilter sequence 2 then action discard
, multiple selections available,
Related content
set firewall filter sequence then action
set firewall filter sequence then action
More like this
set firewall filter sequence then action
set firewall filter sequence then action
More like this
set firewall filter sequence then action
set firewall filter sequence then action
More like this
set firewall filter sequence then action
set firewall filter sequence then action
More like this
set firewall filter sequence then action
set firewall filter sequence then action
More like this
set firewall filter sequence then action
set firewall filter sequence then action
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.