set firewall filter sequence log interval

To configure the log interval for a filter sequence, use the set firewall filter sequence log interval in L2/L3 configuration mode. To remove the log interval, use the delete form of the command.

Command Syntax

set firewall filter filter-name sequence number log interval time
delete firewall filter filter-name sequence number log interval

Parameters

Example

The following example configures sequence 10 of the MyFilter filter to record the log every 15 seconds:

admin@Switch# set firewall filter MyFilter sequence 10 log interval 15

The following example removes the log interval from sequence 10 of the MyFilter filter:

admin@Switch# delete firewall filter MyFilter sequence 10 log interval  
Deleting: 
>   interval: 15
OK