/
set interface aggregate-ethernet evpn mh es-id

set interface aggregate-ethernet evpn mh es-id

Owned by Tracy Yang
Nov 13, 2023

Run the command set interface aggregate-ethernet evpn mh es-id to set the Ethernet Segment Identifier (ES-ID) for the EVPN multi-homing feature on a given aggregate Ethernet interface.

Run the command delete interface aggregate-ethernet evpn mh es-id to delete the ES-ID from the switch configuration.


Command Syntax

set interface aggregate-ethernet <aggregate-ethernet> evpn mh es-id <ES-ID>

delete interface aggregate-ethernet <aggregate-ethernet> evpn mh es-id <ES-ID>


Parameter

Parameter

Description

aggregate-ethernet <aggregate-ethernet>Specifies the aggregate Ethernet interface, the value is a string, e.g. ae1.
es-id <ES-ID>Specifies the ES-ID. The value is an integer that ranges from 1 to 16777215.


Example

  • Configure the ES-ID to 40 for aggregate Ethernet interface ae1.
admin@Xorplus# set interface aggregate-ethernet ae1 evpn mh es-id 40
admin@Xorplus# commit

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.