set protocols vrrp interface vrid ipv6-nd mtu

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set protocols vrrp interface vrid ipv6-nd mtu command configures the MTU size to be sent in the RA messages.

The delete protocols vrrp interface vrid ipv6-nd mtu command restores the default configuration.


Command Syntax

set protocols vrrp interface <interface-name> vrid <virtual-router-id> ipv6-nd mtu <mtu-value>


Parameter

Parameter

Description

interface <interface-name>

Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string.

vrid <virtual-router-id>

Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254.

mtu <mtu-value>Specifies the MTU size. Range: 1-65535 bytes. 


Example

  • Configure the MTU size to 1500 bytes.
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 ipv6-nd mtu 1500
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.