set protocols vrrp interface vrid ipv6-nd ra-interval

The set protocols vrrp interface vrid ipv6-nd ra-interval command configures the maximum time allowed between sending unsolicited multicast router advertisements from the interface.

The delete protocols vrrp interface vrid ipv6-nd ra-interval command restores the default configuration.

Command Syntax

set protocols vrrp interface <interface-name> vrid <virtual-router-id> ipv6-nd ra-interval {msec <interval1> | sec <interval2>}

Parameter

Parameter	Description
interface <interface-name>	Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string.
vrid <virtual-router-id>	Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254.
msec <interval1>	Specifies the maximum time between sending unsolicited multicast router advertisements from the interface in milliseconds. The value is an integer that ranges from 70 to 1800000. Default: 600000.
sec <interval2>	Specifies the maximum time between sending unsolicited multicast router advertisements from the interface in seconds. The value is an integer that ranges from 1 to 1800. Default: 600.

Example

Configure the maximum time allowed between sending unsolicited multicast router advertisements from the interface.

admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 ipv6-nd ra-interval msec 600000
admin@Xorplus# commit