set protocols bfd multihop peer local-address transmit-interval

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set protocols bfd multihop peer local-address transmit-interval command configures the minimum transmission interval (less jitter) that this system wants to use to send BFD control packets for a multi-hop BFD session.

The delete protocols bfd multihop peer local-address transmit-interval command sets the configuration to the default value.


Command Syntax

set protocols bfd multihop [vrf <vrf-name>] peer<peer-ip> local-address <local-ip> transmit-interval <transmit-interval>


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

peer <peer-ip>Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address.
local-address <local-ip>

Specifies a local address used to send the packets. The value is an IPv4 or IPv6 address.

transmit-interval <transmit-interval>

Specifies the minimum transmission interval in milliseconds. Range: 300 to 60000. Default: 300ms.


Example

  • Configure the minimum transmission interval to 500 milliseconds.
admin@Xorplus# set protocols bfd multihop peer 2.2.2.2 local-address 2.2.2.3 transmit-interval 500
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.