The set routing route-map match ipv6-addr command matches the destination IPv6 address or the next hop of the routes.
The delete routing route-map match ipv6-addr command restores the default behavior of not matching the destination IPv6 address or the next hop of the routes.

Command Syntax

set routing route-map <route-map-name> order <NUMBER> match ipv6-addr {address prefix-list <prefix-list> | next-hop <next-hop-address>}

delete routing route-map <route-map-name> order <NUMBER> match ipv6-addr {address prefix-list <prefix-list> | next-hop <next-hop-address>}

Parameter

Parameter	Description
route-map <route-map-name>	Specifies the name of the route map. Required.
order <NUMBER>	Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.
prefix-list <prefix-list-v4>	Specifies the name of the prefix list to be matched.
next-hop <next-hop-address>	Specifies the next hop address of the routes to be matched.

Example

Configure a match clause in the route map to match the address prefix length of the routes.

admin@Xorplus# set routing route-map GlobalMap order 10 match ipv6-addr address next-hop ::ac12
admin@Xorplus# commit

Browser not supported