The run show igmp interface command displays information about IGMP interfaces.

Command Syntax
run show igmp interface [<interface-name>]

Parameter

Parameter	Description
<interface-name>	Optional. Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name. The value is a string.

Example

Display the IGMP configuration and running information on VLAN771.

admin@XorPlus# run show igmp interface vlan771 
Interface : vlan771
State     : up
Address   : 71.1.1.166
Uptime    : 00:11:18
Version   : 3


Querier
-------
Querier     : local
Start Count : 0
Query Timer : 00:01:43
Other Timer : --:--:--


Timers
------
Group Membership Interval      : 260s
Last Member Query Count        : 2
Last Member Query Time         : 2s
Older Host Present Interval    : 260s
Other Querier Present Interval : 255s
Query Interval                 : 125s
Query Response Interval        : 10s
Robustness Variable            : 2
Startup Query Interval         : 31s


Flags
-----
All Multicast   : no
Broadcast       : yes
Deleted         : no
Interface Index : 52
Multicast       : yes
Multicast Loop  : 0
Promiscuous     : no

Display information about all IGMP interfaces.

admin@XorPlus# run show igmp interface
Interface         State          Address  V  Querier  Query Timer    Uptime
vlan2              up        10.10.60.10  2    local     00:00:40  02:13:12
vlan3              up        10.10.61.10  3    local     --:--:--  00:36:29

Browser not supported