Run the command set protocols ospf compatible rfc1583 to enable OSPF compatibility with RFC1583 (backward compatibility). If RFC1583 compatibility is enabled, then the route cost calculation follows a different method.

Run the command delete protocols ospf compatible to delete this configuration.

Command Syntax

set protocols ospf [vrf <vrf-name>] compatible rfc1583

delete protocols ospf [vrf <vrf-name>] compatible

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF for the OSPF instance.

Example

Enable OSPF RFC1583 compatibility:

admin@XorPlus# set protocols ospf vrf BLUE compatible rfc1583
admin@Xorplus# commit

Browser not supported