The set routing route-map set-action originator-id command modifies the originator-id attribute of the BGP route entry with the value configured in the action clause.
The delete routing route-map set-action originator-id command restores the default behavior of not modifying the originator-id attribute of the BGP route entry.

Command Syntax

set routing route-map <route-map-name> order <NUMBER> set-action originator-id <ipv4-address>

delete routing route-map <route-map-name> order <NUMBER> set-action originator-id <ipv4-address>

Parameter

Parameter	Description
route-map <route-map-name>	Specifies the name of the route map. Required.
order <NUMBER>	Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.
originator-id <ipv4-address>	Specifies originator-id attribute of the BGP route entry. The value is an IPv4 address.

Example

Configure a action clause in the route map to modify the originator-id attribute of the BGP route:

admin@Xorplus# set routing route-map GlobalMap order 10 set-action originator-id 10.10.10.1
admin@Xorplus# commit

Browser not supported