The set protocols dot1x max-sessions-per-port command globally configures the maximum number of NAC sessions that are allowed to be established on each port enabled for NAC.

Command Syntax

set protocols dot1x max-sessions-per-port <max-sessions-number>

Parameter

Parameter	Description
max-sessions-per-port <max-sessions-number>	Specifies the maximum number of NAC sessions. The value is an integer in the range of 0 to 512. The default value is 0, indicating that there is no limit on the number of NAC sessions.

Usage Guidelines

The command set protocols dot1x max-sessions-per-port <max-sessions-number> is a global setting, which will take effect on all the interfaces enabled for NAC.

PicOS also provides the command set protocols dot1x max-sessions-per-port <max-sessions-number> to configure the maximum number of NAC sessions that are allowed to be established on a specified interface.

The maximum number of NAC sessions configured on an interface has a higher priority over the value configured globally.

Example

Configure the maximum number of NAC sessions that are allowed to be established on each interface enabled for NAC globally.

admin@Xorplus# set protocols dot1x max-sessions-per-port 30
admin@Xorplus# commit

Browser not supported