The set system ntp server-ip command configures the IP address of the remote NTP server.

Note: the route between NTP server and NTP source interface is required to be reachable.

Command Syntax

set system ntp server-ip <ipv4-address>

Parameter

Parameter	Description
server-ip <ipv4-address>	Specifies the IPv4 address of the remote server. The value is an IPv4 address, e.g. 192.168.10.100.

Example

admin@XorPlus# set system ntp server-ip 192.168.10.100
admin@XorPlus# commit

Browser not supported