The set protocols msdp mesh-group member command is used to configure the MSDP member devices.

Command Syntax

set protocols msdp mesh-group < mesh-group-name> member <peer-address>

Parameter

Parameter	Description
mesh-group < mesh-group-name>	Specifies the name of the MSDP mesh group. The value is a string.
member <peer-address>	Specifies the address of the remote MSDP peer that becomes a MSDP member. The value is in dotted decimal format.

Usage Guidelines

Only one mesh group is allowed in a PIM-SM domain.

When configuring MSDP peers, configure the local MSDP device as the source and all the other remote MSDP peer devices in the same mesh group as members.

Example

Create an MSDP mesh group.

admin@Xorplus# set protocols msdp mesh-group 6.6.6.6 member 3.3.3.3
admin@Xorplus# set protocols msdp mesh-group 6.6.6.6 source 2.2.2.2 
admin@Xorplus# commit

Browser not supported