This command is applied on AS4610-30P, AS4610-54P, AS4630-54PE, AS4625-54P, AS4630-54NPE, S5860-24MG-U, S5860-48MG-U and S5860-48XMG-U.

The set poe interface mode command configures PoE pair mode on all the ports or a specific physical port.

Command Sytax

set poe interface {<port-id> | all} mode <value>

Parameter

Parameter	Description
interface {<port-id> \| all}	Specifies interface ID. The value could be ge-1/1/1 to ge-1/1/48, all indicates a global configuration that set a same mode on all ports.
mode <value>	Specifies PoE pair mode, the value can be signal and spare. signal: Pair type A, deliver power with data transmit wires. spare: Pair type B, deliver power with spare wires. The default value is signal.

Parameter

Description

interface {<port-id> | all}

Specifies interface ID. The value could be ge-1/1/1 to ge-1/1/48, all indicates a global configuration that set a same mode on all ports.

mode <value>

Specifies PoE pair mode, the value can be signal and spare.

The default value is signal.

Note:

Configuration on a specific port has a higher priority than that of global configuration.

Example

This example is to configure pair mode spare on all the ports and ge-1/1/1:

admin@XorPlus# set poe interface all mode spare
admin@XorPlus# commit
  
admin@XorPlus# set poe interface ge-1/1/1 mode spare
admin@XorPlus# commit

Browser not supported