Run the command set l3-interface vlan-interface ipv6-nd reachable-time to configure the amount of time that the interface considers a device to be reachable after receiving a reachability confirmation from the device.

The command delete l3-interface vlan-interface ipv6-nd reachable-time sets the reachable time to the default value of 0. (no limit).

Command Syntax

set l3-interfacevlan-interface <vlan-interface> ipv6-nd reachable-time <reachable-time>

delete l3-interface vlan-interface <vlan-interface> ipv6-nd reachable-time

Parameters

Parameter	Description
vlan-interface <vlan-interface>	Specifies the VLAN interface name. The value is a string.
reachable-time <reachable-time>	Specifies the reachable time in milliseconds. The value ranges from 1 to 3600000. The default value is 0, indicating no limit.

Example

This example configures an IPv6 reachable time to 2000 milliseconds.

admin@XorPlus# set l3-interface vlan-interface vlan4001 ipv6-nd reachable-time 2000
admin@XorPlus# commit

Browser not supported